Indoor Cycling

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

- Large and rollable trainer mat - Made from high quality, water-repellent 6mm thick foam - Protects your floor against scratches and sweat - Muffles noise and vibrations - 180 x 85 cm

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles. - Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media - SM clamp easily mounts or dismounts from the handlebar or tube - Spring-loaded clamp system is simple to use and securely holds your device in place - Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system - Can mount to your repair stand so you can easily reference the Internet when working on your bike

Trainer thru axle adapter for CycleOps Trainers. Fits most 142mm thru axles with 1.0 and 1.75 thread pitch. This kit consists of an axle, washers, and end caps with bolts for use with CycleOps Classic or Pro Series trainers. The axle is threaded on both sides to fit Syntace and Maxle/ABP style thru axle systems. PowerSync Trainers are not currently 29er compatible. Partial list of compatible bike frames: - Canyon - Trek - Specialized - Cannondale - Niner - Salsa - Giant Reign - Scott - Santa Cruz - Norco

- Adapter for Tacx Direct Drive trainer - 01 is compatible with 142 x 12mm and 148 x 12mm - 02 is compatible with 135 x 10mm - 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive trainer), 142 x 12mm and 148 x 12mm - 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the thru axle mount on a Tacx NEO or FLUX Smart trainer.

The Elite Folding Mat increases the comfort of your home cycling setup while protecting the surfaces you train on every day. It's easy to use, store, and transport and can be stored everywhere in your house. Dimensions: 1.8m x .9m

Elite Qubo Power Fluid Trainer offers exponentially progressive fluid resistance of 540W @ 40km/h, up to 1,200W @ 60km/h - Elastogel roller reduces noise and tire wear - My E-Training App & Desktop 1 month free - Compatible from 20- to 29-inch wheels

This height-adjustable front wheel support can simulate both flat terrain and slopes perfectly - Unique design with 5 levels lets you adjust the height of your front wheel to simulate hill climbs up to 6% - Anti-slip rubber feet eliminate handlebar vibrations - Internal design that guarantees maximum wheel stability - Suitable for both road and MTB - You can attach to the trainer frame when not in use for easy transport and storage

The Elite Smart Sterzo riser block allows steering up to 34 deg while riding your rear wheel trainer while using ANT and Bluetooth communication protocol, interacts with compatible apps to give you the most realistic indoor ride. It’s rotating pivot features a practical automatic return system for you to easily get the handlebar back to its original position. Compatible with tires up to 56mm wide

Introducing Tuo, Elite’s new indoor home trainer created in cooperation with Adriano Design. Tuo is an interactive wheel-on home trainer featuring automatic resistance adjustment. It’s a reliable technological companion with a compact design, created to seamlessly fit in any part of your house and to take your training sessions to the next level. It exudes a Made in Italy design that's both understated and distinctive, and that makes it fit right in with your living room or office furniture when not in use. Tuo features a solid, compact structure made with high-quality materials: aluminum resistance unit, steel frame, and legs made of beechwood—one of the most beautiful, sturdy, and solid materials used in interior design. Beechwood is not just about the look though, it’s also perfect for absorbing vibration while training and for ensuring great stability. Additional features include stability-enhancing, anti-slip rubber feet and the Fast Fixing locking system—by engaging a practical lever, you can hook and unhook the bicycle to the support frame in a single quick operation. Light and easy to transport, Tuo features easily foldable frame and legs, so setup is immediate, anytime. Tuo is not just very compact and gorgeous to look at, it’s also quiet. The roller is made in Elastogel material, which is an exclusive polyurethane molecule developed and tested by Elite to limit friction noise by 50% and decrease tire wear. Thanks to the practical side micro-adjustment mechanism and the ability to easily reposition the stand for 29-inch wheels, bicycle setup is simplified. Tuo is the most versatile among our home trainers, as it is compatible with frames with wider chainstays and includes all the necessary adapters to install bicycles with rear axles ranging from 130x5mm quick release to Boost 148x12mm thru-axles. Tuo is a smart, interactive home trainer that connects with multiple apps, software, computers, and devices (smartphones and tablets) with iOS, Android, OSX, and Windows. Data transfer between the trainer and other areas of the system is wireless. Using this feature allows you to manage resistance levels and change display parameters, for convenient personalization and interactivity on your indoor training session. Tuo sends Power and Speed data and can be managed via the My E-Training software (12-month free subscription) or other indoor cycling services, such as Zwift, TrainerRoad, The Sufferfest, Bikevo, Kinomap, and many more.

Tuo is an interactive trainer with automatic resistance adjustment. Compatible with multiple e-training software platforms via wireless communication. Elastogel resistance roller increases tire life and decreases noise. Stylish construction of aluminum resistance unit, steel frame with beechwood legs. - Tuo can be managed via the My E-Training software (12-month free subscription) or other indoor cycling services (which usually require paid subscription), such as: Zwift, TrainerRoad, The Sufferfest, Bikevo, Kinomap and many more. - Compatible with 130mm QR all the way to 148x12mm thru-axle with included adaptors - Simulates up to a 10% slope - Accuracy to +/- 3% - Fully assembled